In addition to providing basic assistance with troubleshooting, this article explains how to pair a Dell Bluetooth-enabled computer with a Dell Bluetooth device.
1. Pair to a Bluetooth Device (new and re-pair)
Dell Bluetooth Keyboard
- Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
Note: At the point when there is no Bluetooth switch, see The Bluetooth Flip Symbol Doesn’t Seem segment.
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Press the power switch on the bottom of the Bluetooth keyboard while the keyboard is off.
8. Find and press the Bluetooth button that is situated on the lower part of the console. The Bluetooth Drove on the highest point of the console squints when it is in revelation mode and is off when the console isn’t in disclosure mode.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
10. You might be asked to enter the passkey tracked down in the documentation of your Bluetooth Device. Assuming this is the case, input the passkey.
Note: You may be asked to enter the passkey or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
11. The devices are paired and functioning properly.
Dell Bluetooth Mouse
- Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Press the power switch on the bottom of the Bluetooth mouse while the mouse is off.
8. Find and press the Bluetooth button that is situated on the lower part of the console. The Bluetooth Drove on the highest point of the console squints when it is in revelation mode and is off when the console isn’t in disclosure mode.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
11. The devices are paired and functioning properly.
Dell Bluetooth Travel Mouse WM524
- Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Find the Power button situated on the lower part of the mouse.
8. Press the Power button for two seconds. The blue Drove squints show that the device is discoverable for 180 seconds and is off when not in disclosure mode.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
10. You might be asked to enter the passkey tracked down in the documentation of your Bluetooth Device. Assuming this is the case, input the passkey.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
11. The devices are paired and functioning properly.
Dell BH200 Bluetooth (BT) Stereo Headset
- Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Beginning with the Bluetooth headset off, press and hold the play/stop focus button on the right earpiece until the blue LED begins blinking. Typically, this takes about 8 seconds.
8. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
9. You may be asked to enter the passkey or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
10. The pairing of the devices is completed.
Dell AD211 Bluetooth Portable Speaker
1. Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Beginning with the Bluetooth speaker off, press the power button that is situated on the finish of the speaker.
8. Find and press the Bluetooth button for two seconds that is below the power button. The Bluetooth Drove flickers white to demonstrate that the device is in revelation mode.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
`10. The pairing of the devices is completed.
Dell WM713 Wireless Touch Mouse
1. Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Find the Power button situated on the lower part of the mouse.
8. Press and hold the power button on the mouse for two seconds. When the mouse is in pairing mode, the power status light turns blue.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
10. The pairing of the devices is completed.
Dell Bluetooth Mouse WM615
1. Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Rotate the back key plate clockwise to turn on the mouse.
8. Press the Bluetooth matching button (situated on the base) for 3 seconds. Within two minutes, the Bluetooth pairing began, as indicated by the white blinking of the top-mounted LED.
9. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
10. The pairing of the devices is completed.
Dell Wireless 360 Speaker System AE715
1. Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Tap the button at the top for pairing Bluetooth. Within two minutes, the Bluetooth pairing began, as indicated by the white blinking of the top-mounted LED.
8. On the Bluetooth and different devices window, contact or snap to feature Dell Remote 360 Speaker AE715, then, at that point, contact or snap Done.
Note: You may be asked to enter the passkey, or password, that can be found in your Bluetooth device’s documentation. In that case, enter the passkey.
9. The devices are paired and functioning properly.
Generic Bluetooth Pairing Instructions
1. Check to see that the following requirements are met:
- New batteries are introduced in the Bluetooth console.
- The most recent driver for the computer’s Bluetooth adapter has been installed. See the Dell Knowledge Base Article for additional details: How to Install and Download a Driver.
- The Bluetooth console that you will coordinate is inside 30 feet (10 meters) of the PC.
2. Type Bluetooth into the Search box.
3. Touch or click the system settings for Bluetooth and other devices.
4. Guarantee that Bluetooth is set to on (contact or snap to switch now and again).
5. Contact or snap Add Bluetooth or other Devices.
6. Contact or snap Bluetooth.
7. Guarantee that your device is in Revelation mode.
Note: For additional instructions on how to put your device into discovery mode for devices that are not manufactured by Dell, consult the owner’s manual for your Bluetooth device.
8. Touch or click the desired device in the Bluetooth & Other Devices window, then touch or click Done.
Note: If you are asked to enter the passkey (password) found in your Bluetooth device’s documentation, enter it.
9. The devices are paired and functioning properly.
2. Connecting a Bluetooth Device to Swift Pair
The newest method for pairing Bluetooth devices with Windows 11 and Windows 10 computers is Swift Pair, which was made available in Windows 11 and Windows 10.
See the Microsoft Base article Swift Pair for additional details. (English Only)
3. Other ways to fix the Dell Bluetooth Adapter that wouldn’t pair
See the Dell Information Base article The Dell Bluetooth Connector Didn’t Coordinate, for extra investigating ventures for when the Dell Bluetooth connector didn’t coordinate.
4. The icon for the Bluetooth toggle does not appear
- After holding down the Windows (
) key, and then press the q key.
) key, and then press the q key.2. Enter “device manager” in the search bar.
3. In the program list, select Device Manager (Control Panel).
4. Click In addition to (+) close to Bluetooth.
Note: At the point when there is no posting for Bluetooth, go to Stage 6.
5. Search for any posting that has a down bolt close to it.
Note: Select Enable device from the right-click menu when such a listing appears; no other actions are required. Close the Device Manager window.
6. Navigate to the website titled “Dell Support.”
7. There are three choices for identifying your computer.
Either:
- Touch or click the computer’s listing under THIS PC.
Note: At the point when there is no posting for your PC under THIS PC, you can contact or snap Download and Introduce SupportAssist, which will naturally recognize your PC for you. Download and install SupportAssist by following the on-screen instructions.
- Touch or click the Search button, then enter the Service Tag, Dell EMC Product ID, or Model, and select your computer from the list.
- Click or touch to browse all items: The model of the product, the brand name, and the kind of device you have to choose from.
8. Click the DIAGNOSTICS tab or touch it.
9. Under Custom Part Test, contact or snap-select individual parts.
10. In the rundown, contact or snap to choose Bluetooth device under Framework devices.
Note: There are additional hardware tests available.
11. Click or touch the Run Your Test button. The test is run, and the outcomes are shown.